The guide offers brief introduction and popular names for the concrete anchor fasteners. The guide is very helpful to find the right anchor fastener for your project.

Concrete Nylon Nail-It Anchor – Light duty concrete fastener for concrete brick and block.

Other Popular Names
nylon nail-it, nail-it, nail it, strike anchor, mushroom head, nylon nail anchor, tap-its, impact anchor, thunder tap, nylon nail anchors, nylon nail in, concrete and masonry anchor.

Brief Introduction:
Made of injection molded, thermoplastic-formula polyamide resins, the Nylon Nail-It Anchor are comprised of a shank and a steel pin expander. In addition to a series of circumferential ribs running for a portion of its length, the shank is a split from the bottom up for a majority its length. The anchor body has a concentric cavity, or bore, which runs through the head thickness and into the shank for a depth just beyond the point where the slit terminates in the body. The steel pin expander, made of high carbon steel properly heat treated and heavily plated with bright zinc, differs from a nail because of a specially designed thread it has in a section of it’s shank and because it has a screwdriver slot in the head. It has maximum corrosion resistance. The specially designed threads and head on the expander pin lock the assembly.

Common variations and misspellings:
Tap it anchors, tap its, thunder tap, nylon nail-in.

From: Concrete Fastening Systems, Inc.
More information, please visit the site http://www.confast.com
Edit by Jason