 |
 |
|
| Industrial
Supplies >> Overview of GDL Water Pump |
|
| |
|
| Overview of GDL Water Pump |
|
|
|
GDL water pump
also is called
light vertical multistage centrifugal pump.
General Introduction
GDL vertical multipolar and stainless steel centrifugal pump, manufactured by adopting advanced denimark technology. The best advantage is the advantages of advanced water-power model design, high efficient and save power. There is vane wheel inside, the pump shell and main fittings takes with stainless steel punch, flow-road is very smooth, axle is hard metal tool, so that will be super powerful longlasting using time, to prevent producing second pollution, and it axle cover seals with wear-resisting machine, unreveal. Electrical machine adopts Y2 lead case, import bearing, insulating grades F. Pump works smoothly, and low-noise. The quality of this product is depenable, good appearance, small bulk, light, and easy for transport and install. It is ideal water pump of green and surrounding protection and save power.
Typical Application
1. Urban water supply and pressure boosting
2. Industrial circulating system and processing system
3. Water supply for boiler or condensate system
4. Environmental protection water treatment and infiltration analysis system
5. Agriculture irrigation and dewatering
6. Industrial building cleaning and other washing work
7. (Others) many special applications
Scope of Application
Common type is applicable for liquid conveying, circulation and boosting of hot and cold clean water, soft water;
Stainless steel type is also used for water with tiny content of alkai, mineral, distilled water, water for swimming pool and solution with chlorride, but the allowed temperature of the liquid shall be reduced.
Working Conditions
1. Liquid type: hot and cold clean, non-flammable, non-explosiveliquid without solid granules and fibres;
2. Liquid temperature: ambient temperature: -15oC - +70oC, hot water: +70 oC - +120oC
3. Highest environmental temperature: +40 oC
4. Min. inlet pressure: according to NPSH curve
5. Min. safe delivery water head: 0.5m
General Parts of GDL Pump
1. Electric motor
2. Pump head
3. Mechanical seal
4. Water-out guide vane
5. Support guide vane
6. Guide vane
7. Inducer
8. Inlet and outlet section
9. Base frame
10. Bearing
11. Impeller
12. Shaft
13. Impeller separating sleeve
14. Pressure-resistant cylinder
15. Coupling
|
|
