Home - Article - Packing and Paper

Packing Tall Table Lamps

Your major problem in packing a tall lamp may be acquiring a carton large enough to accommodate the lamp. If you can't find such a carton you can purchase dishpack cartons from your mover in which to pack tall lamps. Dishpack cartons are tall, extra sturdy cartons originally intended for packing fragile articles, such as dishes.

Remove lamp shade and bulb, Wrap cord around base of lamp.

Line the bottom of your carton with a considerable amount of wadded-up packing paper. This will insure extra cushioning and protection for the lamp.

Spread out several sheets of packing paper so that your packing paper is extended longer and wider than the lamp. Place lamp in the center of your packing paper.

Roll packing paper around your lamp.Tuck in the end ot the paper at base of lamp. Use sealing tape, it necessary, to prevent end from coming apart.

Seal the seams where packing paper overlaps around your bundle with your tape.

Fold up other end (at the top of lamp) of packing paper and seal with tape, Place bundle in previously lined carton.

If you have several tall table lamps, place them each in the carton so that the base of one lamp is next to the top of the next lamp. Alternate them. This will make them fit better in the carton.

When all lamps are packed in the carton, fill out the carton with plenty of wadded-up packing paper. Be generous. Mark "FRAGILE" and "LAMPS" in large, clear letters on all sides of the carton.


 


Relative Articles:

 

Article Navigation

Latest Article

Search Article in Site